DCW-C2010-01
$354.00 CAD $453.00 CAD
| /
يختزل كنسول الحائط Clasten من الألباستر الكنسول إلى عنصرين: عمود من الحجر والصفيحة التي تحمله. استُخدم الألباستر بهذه الطريقة منذ العصور القديمة — رقيق بما يكفي لنفاذ الضوء، وكثيف بما يكفي لتليينه — وقطعه كأسطوانة بسيطة لا يترك شيئًا بين المادة والعين. تُحافظ صفيحة النحاس الخلفية على شكل مستطيل مسطح للسبب ذاته. لا ظل، لا ناشر، لا تجهيزات مرئية؛ الحجر هو التجهيز.
حجمان — نفس عرض الأسطوانة 3.1″ (8 سم)، نفس الألباستر والصفيحة النحاسية والتجويف؛ فقط الارتفاع يتغير.
| الحجم | بوصات | سنتيمترات | مناسب لـ |
|---|---|---|---|
| مدمج | W 3.1″ × H 11″ | W 8 × H 28 cm | بجانب السرير، ممر ضيق، غرفة المسحة |
| طويل | W 3.1″ × H 12.6″ | W 8 × H 32 cm | مرآة الزينة، الدهليز، جدار مميز |
عند مرآة الزينة، ثبّت مركز التجهيز على ارتفاع 60–66″ (150–170 سم) فوق الأرضية؛ في أماكن أخرى، اجعله محاذيًا مع ارتفاعات الفن أو المرآة المجاورة. للحصول على أزواج مطابقة يدويًا، أرسل بريدًا إلكترونيًا إلى info@docos.us.
مرجع تقني وأدلة رعاية كنسول الحائط Clasten من الألباستر. هل تحتاج إلى مستند غير مدرج؟ أرسل بريدًا إلكترونيًا إلى info@docos.us.
Hand-cut alabaster lighting that glows from within — chandeliers, pendants, sconces, and lamps, each carved from a single block of natural stone.
Alabaster can't be moulded or mass-pressed — it is cut. Every shade starts as solid stone and is worked by hand until it's thin enough to glow evenly. That's why no two are the same.
Blocks of natural alabaster are extracted and graded for translucency and the quality of their veining before any cutting begins.
Each block is sliced and turned or carved to form, then hollowed so a bulb can sit behind the stone wall.
The walls are sanded to an even thickness so light passes through without dark patches, then polished by hand.
Fitted with brass hardware and wired to a 120V, ETL-compliant build, then inspected before it ships.
Raw alabaster blocks and hand-turned shades in our workshop — each piece is cut, hollowed, and finished by hand before it is wired and shipped.
Light passes through the stone itself — the lit-from-inside quality you can't get from glass or acrylic.
Cut from a solid block, so the cloud-like veining is its own. No two alabaster fixtures are identical.
The stone scatters light rather than aiming it. Pair with a 2700K bulb; most fixtures dim on a compatible LED dimmer.
A soft accent beside stronger overhead light — at home with wood, linen, and brass in modern interiors.
Switched off, an alabaster fixture is a quiet stone object. Switched on, the whole piece glows — sculpture you happen to be able to turn on.
Chandeliers, pendants, sconces, table and floor lamps — all cut from natural alabaster, most paired with brass. Dozens of pieces in all.
Hang a linear pendant or chandelier roughly 30–36″ above the surface. For a 6–8′ island, size the fixture or cluster to about two-thirds the counter length.
Two-story spaces suit a tiered chandelier — Corbett or Miira. Keep the lowest point at least 7′ off the floor in a walkway.
A wall sconce — Ando, Marmo, Velora — frees the nightstand and adds the soft accent layer. Plug-in versions skip the hardwiring.
A table lamp — Marie, Pico — anchors a reading corner with warm light beside your overheads.
Exact dimensions, base, and finish live on each product page. The below holds across the range for the US market.
Alabaster is a natural stone — surface variation and veining are inherent to the material, not defects. Your fixture's pattern will be its own.
| Shade material | Natural alabaster, hand-cut (veining varies by piece) |
| Hardware | Brass or metal; finish varies by model |
| Light source | E26 or G9 base depending on fixture (see product page) |
| Voltage | 120V, US standard |
| Dimming | Dimmable with a compatible LED dimmer or bulb |
| Bulb colour | 2700K warm-white recommended to preserve the stone tone |
| Mounting | Hardwired and plug-in options across the range |
| Use location | Indoor, dry / damp locations |
| Certification | ETL Certified for North American safety standards |
| After-sale | 30-day returns · free shipping on all US orders |
Send a photo, sketch, or dimensions and our designers render any alabaster fixture in your actual space, to scale, within 24 hours. No deposit, unlimited revisions.
Alabaster is a solid, fine-grained stone with real weight — not fragile in normal use. It is softer than marble, so avoid knocks and harsh chemical cleaners. A soft, dry cloth keeps it looking right for years.
No — and that's by design. Each shade is cut from natural stone, so the veining and tone are unique to your piece. The product photo shows a representative example; yours will have its own distinct veining.
Use a 2700K warm-white LED to bring out the honeyed, candle-like tone in the stone. Cooler bulbs make alabaster look gray. Most fixtures take an E26 or G9 base — check the product page — and dim with a compatible LED dimmer.
Chandeliers (Corbett, Kurve, Miira) suit dining rooms and two-story foyers; pendants suit kitchen islands; sconces suit bedsides and hallways. Send us your dimensions for a free 3D preview to scale before you order.
Free shipping on all US orders, 30-day returns, and ETL Certified fixtures held in a US warehouse in Halethorpe, MD. Questions? Email info@docos.us or call +1 800-716-3167, Mon–Fri 9am–6pm EST.
Energy-efficient LEDs deliver a brighter, longer-lasting glow with none of the upkeep of traditional bulbs.
Every order ships free with express delivery, no minimums and no hidden fees.
Not the right fit? Send it back within 30 days for a full refund, no questions asked.
