Use code DOCOS10 for 10% off your first order Shop Now

Free Shipping on All Orders Shop Now

30-DAY RETURNS | ETL CERTIFIED | 24/7 SUPPORT

No results found

Try a different search term or browse by category

Camiora Wall Sconce

DCW-B1704-01

£175.00 GBP £281.00 GBP

| /

Inspiration

The Camiora started with a lotus caught half-open — petals still curling outward, the centre already lit. We shaped it in porcelain across three overlapping rows so the flower keeps its depth from any angle, then set it on a curved arm and a turned oak disc, the way a single stem meets still water. The wall version came after the pendant, for the rooms where a hanging light would be in the way. Everything is left plain: white glaze, bare grain, one warm bulb inside.

Key Features

Pull-Chain Switch
A 19.7″ (50cm) pull chain switches the light on and off at the fixture — no wall switch needed.
Layered Porcelain Petals
Three rows of ceramic petals form the open lotus shade; light escapes forward and down through the petal gaps.
Solid Oak Backplate
A 4.7″ (12cm) round oak backplate with natural grain covers the junction box.
Size & Fit

Total Height11.8″ / 30 cm
Shade Diameter7.9″ / 20 cm
Wall Projection7.9″ / 20 cm
Backplate Diameter4.7″ / 12 cm
Pull Chain19.7″ / 50 cm
Room Size32–54 sq ft (3–5 m²)
Camiora Wall Sconce dimensions diagram
!
Hardwired install · licensed electrician recommended The sconce mounts to a standard wall junction box, and the oak backplate covers the box. A confident DIYer with hardwire experience can fit it, but an electrician is recommended for code compliance. It's a lightweight fixture — no reinforced bracing needed. Dry locations only: the oak is not rated for damp environments.
Specifications

Fixture Type
Wall sconce · hardwired · layered porcelain lotus shade
Materials & Finish
Glazed white porcelain petals + solid oak backplate (natural grain) + warm metal arm
Dimensions
H11.8″ × Ø7.9″ · 7.9″ wall projection · Ø4.7″ backplate (H30 × Ø20 × 20cm proj. · Ø12cm)
Light Source
E26 or E27 × 1 · 12W LED bulb included & replaceable (~1000 lm, 60W incandescent equivalent) · warm light 3000K
Switch & Dimming
Pull-chain switch, 19.7″ (50cm) chain · dimmable with a dimmable LED bulb and an LED-rated wall dimmer (not included)
Mounting
Hardwired to a standard wall junction box · two screws into drywall or studs · 120V · dry locations only
Care
Porcelain: dust with a soft dry cloth, support each petal by hand · oak: dry cloth only, no water or solvents
Design Style
Japandi Modern Farmhouse Cottagecore Warm Minimalist
Best For
Bedside, reading chair, vanity, hallway, or powder room · ambient accent light
Use Case

The Camiora works best as a hardwired bedside sconce above a nightstand or beside a vanity mirror, where the pull chain is easy to reach from bed or while seated. In a hallway or powder room it reads as an ambient accent rather than task light, since the porcelain sends most of the glow forward and down through the petal gaps. Hardwiring keeps the wall clean — no cord, no outlet — but it does need a junction box. It pairs with the matching Camiora Pendant Light for a coordinated bedroom or entryway, and sits well alongside oak or walnut furniture, linen textiles, and warm-metal hardware. Email info@docos.us for trade pricing.

Downloads

Technical reference and setup files for the Camiora Wall Sconce. Need a doc that's not listed? Email info@docos.us.

FAQ

Is the bulb included?
Yes — one 12W LED bulb in warm 3000K, on an E26 or E27 medium screw base. It's fully replaceable, and the socket takes bulbs up to a 60W incandescent equivalent.
Does it need a wall switch?
No. The built-in pull chain switches it on and off, so it works on a continuously powered circuit. You can still wire it through a wall switch if you prefer.
How do I make it dimmable?
Use a dimmable LED bulb with an LED-rated wall dimmer. Older incandescent dimmers can flicker or buzz on LED loads — check the dimmer's spec sheet first.
What mounting height do you recommend?
For bedside reading, centre it 24–30″ above the nightstand (roughly 60–66″ from the floor). For hallway or accent use, 70–72″ from the floor. Beside a vanity mirror, align it with standing eye level.
Can I install it in a bathroom?
Beside the vanity only — it's dry-location rated. Keep at least 3 ft of horizontal clearance from any water source, and don't install it in a shower zone or above a tub; the oak isn't rated for damp environments.

Why We Love It

Premium LED Technology

Energy-efficient LEDs deliver a brighter, longer-lasting glow with none of the upkeep of traditional bulbs.

Free & Fast Shipping

Every order ships free with express delivery, no minimums and no hidden fees.

30-Day Hassle-Free Returns

Not the right fit? Send it back within 30 days for a full refund, no questions asked.