No results found
Try a different search term or browse by category
VKC4-2672
$328.00 USD $650.00 USD
| /
A classic branch chandelier with a French-inspired twist. Curved iron arms in an antique brass finish carry white fabric shades with a scalloped lower edge — the kind of detail that softens a room without making it fussy. Each shade is lined with an acrylic diffuser panel so the light spreads evenly across the room rather than pooling around a bare bulb. Available in 3-light, 5-light, and 7-light configurations, all in the same antique brass and white finish.
Each arm takes a standard E26 medium screw base (North America) or E27 (Europe and worldwide). We recommend 40–60 W equivalent warm-white LEDs at 2700–3000 K — the acrylic-lined shades diffuse the light evenly, so the warmer the bulb, the softer and more inviting the room feels.
This chandelier hardwires to a ceiling junction box via the included rod and canopy — it is not plug-in. A licensed electrician is recommended. Always turn off power at the breaker before installation.
White fabric with a ruffled scalloped hem — a French-traditional detail that softens the silhouette without overpowering the room.
Each shade is internally lined with an acrylic panel — light spreads evenly across the room with no hot spots or visible bulb shadow.
Curved iron frame in a warm antique brass finish — pairs naturally with white shades and works across traditional, transitional, and French country interiors.
Standard medium screw base per socket — works with any warm-white LED or Edison filament bulb you already own.
3-light · 5-light · 7-light — one fixture family scaled to fit a breakfast nook, dining room, or large open-plan space.
AC 110–240 V · 50/60 Hz — works on US and international circuits without an adapter.
H28 cm · 19.7″ wide. Over a round table of 36–48″ or a 2–4 person rectangular table. Shade: 18×18.5 cm each.
H30 cm · 27.6″ wide. Over a 4–6 person dining table or a generous kitchen island.
H30 cm · 32.7″ wide. A statement piece over a 6–8 person table or a large living room seating area.
Ceiling canopy: Ø12 cm. Mounting rod: 10×19 cm (included). Combine with an extension rod if a higher ceiling requires additional drop — contact us for options.
We recommend 40–60 W equivalent warm-white LEDs at 2700–3000 K. The acrylic-lined shades diffuse light gently — a warmer bulb gives the room a candlelit quality. For dimming, choose Triac-dimmable LED bulbs and pair with a compatible Triac wall dimmer.
🔍 Dimensions — tap to enlarge
| Material | Iron frame (antique brass finish) · Fabric shades · Acrylic diffuser lining |
| Finish | Antique brass + white (one colorway) |
| Configurations | 3-light · 5-light · 7-light |
| Dimensions | 3-light: Ø50 × H28 cm (19.7″ × 11″) 5-light: Ø70 × H30 cm (27.6″ × 11.8″) 7-light: Ø83 × H30 cm (32.7″ × 11.8″) |
| Shade size | 18 × H18.5 cm per shade (3-light confirmed; please verify for 5 & 7-light) |
| Ceiling canopy | Ø12 cm (all sizes) |
| Mounting rod | 10 × 19 cm (included) |
| Light source | E26 / E27 per arm — bulbs sold separately |
| Installation | Hardwired ceiling chandelier (junction box required) |
| Voltage | AC 110–240 V · 50/60 Hz |
| Dimmable | Yes — with dimmable LED bulbs and a compatible Triac dimmer switch |
| Best for | Dining room, living room, bedroom, entryway — traditional, transitional, French country interiors |
The 3-light (Ø50 cm / 19.7″) suits a round table of 36–48 inches or a 2–4 person rectangular table — it also works well as a bedroom or entryway pendant. The 5-light (Ø70 cm / 27.6″) is the most versatile, fitting a 4–6 person dining table or a kitchen island. The 7-light (Ø83 cm / 32.7″) makes a strong statement over a 6–8 person table or a large living room. When in doubt, size up — chandeliers tend to look smaller in a real room than they do in photos.
No — bulbs are sold separately. Each arm takes a standard E26 (North America) or E27 (worldwide) screw base. We recommend 40–60 W equivalent warm-white LEDs at 2700–3000 K. The acrylic-lined shades diffuse the glow softly, so the warmer the bulb, the more inviting the light feels in the room.
The acrylic diffuser panel inside each shade spreads light evenly across the fabric rather than casting a bright spot directly below the bulb. This means no visible bulb shadow on the ceiling and a consistent, soft glow through the fabric — the same effect you get from a high-quality drum shade, but with the traditional silhouette of an open-arm chandelier.
Yes — fit Triac-dimmable E26/E27 LED bulbs in all sockets and pair with a standard Triac wall dimmer. All arms dim together on one circuit. Make sure every socket has a dimmable bulb — mixing dimmable and non-dimmable bulbs on the same circuit can cause flickering.
This is a hardwired fixture that connects directly to your ceiling junction box. If you are comfortable with basic wiring and your local codes allow homeowner installation, the canopy and rod system make the process straightforward. Otherwise, a licensed electrician can fit it in under an hour.
Dust the fabric shades regularly with a soft brush or a low-suction vacuum with a brush attachment. For spots, dab with a barely damp cloth — never soak or machine-wash the shades. The acrylic diffuser inside can be wiped with a dry microfiber cloth. Clean the brass iron arms with a dry or lightly damp microfiber cloth; avoid abrasive cleaners, which can strip the brass finish over time.
Energy-efficient LEDs deliver a brighter, longer-lasting glow with none of the upkeep of traditional bulbs.
Every order ships free with express delivery, no minimums and no hidden fees.
Not the right fit? Send it back within 30 days for a full refund, no questions asked.
