Utilisez le code DOCOS10 pour 10% de rabais sur votre première commande Magasiner Maintenant
Livraison Gratuite sur Toutes les Commandes Magasiner Maintenant
RETOURS SOUS 30 JOURS | CERTIFIÉ DANS PLUSIEURS PAYS | RÉPONSE SOUS 1 JOUR OUVRABLE
Aucun résultat trouvé
Essayez un autre terme de recherche ou parcourez par catégorie
VKC5-240529-01
€260,95 EUR
| /
Fabrication sur commande — livraison gratuite de porte à porte (transport maritime + dernier km UPS) — livraison gratuite de porte à porte
Parlez à un designer·Rendu 3D gratuit de votre pièce·+1 800-716-3167·réponse en 1 jour ouvrable
CommerceDesigners, architectes et revendeurs : jusqu'à 35 % de réduction, approuvé en 1 jour ouvrable. Demander →
Folded Leaf Lotus Pendant Lamp — layered kraft paper petals, brass hub, three sizes.
Multiple fan-folded kraft paper petals radiate outward from a central brass hub — each petal a long strip of brown paper folded into a chevron-ribbed fan, layered over adjacent petals to build a shallow disc that is fully three-dimensional from below and reads as a flat floating circle from a distance. The single exposed bulb hangs below the hub at the centre of the composition — the paper petals above it catch and scatter the warm light across their ribbed surfaces as a ring of warm shadow and glow. Available in ∅ 60, 80, and 100 cm.
The shade ships flat-packed with the petals folded and bundled. Each petal must be spread and positioned around the central hub during installation. Assembly takes approximately 20–40 minutes and requires no tools. Watch the assembly video below before opening the box. Minor surface variation and tonal differences between paper petals are characteristics of natural kraft paper and are not defects.
The installation and petal-spreading sequence matters. Review the full assembly guide (video below) before removing the components from the packaging to avoid bending petals out of sequence or in the wrong direction.
Folded Leaf Lotus — product overview and installed look
Step-by-step petal spreading, hub mounting, and cable adjustment. Recommended to watch before opening the box.
Each petal is chevron-ribbed brown kraft paper — the surface catches and scatters warm light.
Warm brass central hub and socket — the structural anchor of the layered disc.
Single E26/E27 hangs below the petal disc — open for Edison filament character.
All three sizes share the same petal design and brass hub. Total drop H 150 cm is the cable length — adjustable. Tap diagram to enlarge.

Tap to enlarge — size and proportional reference for all three diameters
| Diameter | Imperial | Suitable for |
| ∅ 60 cm | ∅ 23.6″ | 4-seat dining table · bedroom · entryway |
| ∅ 80 cm | ∅ 31.5″ | 6-seat dining table · living room focal point |
| ∅ 100 cm | ∅ 39.4″ | Large dining room · open-plan living · foyer statement |
Cable: 59″ adjustable per size — extendable on request. Hang height shown at total drop H 150 cm including shade.
The bulb hangs fully exposed below the paper disc — the bulb’s shape and tone are visible and part of the lamp’s character. An Edison filament globe or teardrop E26/E27 at 2700 K is the natural pairing — the visible amber filament below the warm brown paper creates a coherent material composition. LED filament globes at 4–8W provide efficient light with the same visual warmth. Avoid frosted or opaque bulbs — the shade does not conceal the bulb, so a frosted bulb simply reads as a flat white sphere rather than a glowing filament.
Guide to E26 and E27 bulb selection →
| Materials | Kraft Paper, Metal (Antique Brass hub) |
| Sizes | ∅ 60 cm / ∅ 23.6″ ∅ 80 cm / ∅ 31.5″ ∅ 100 cm / ∅ 39.4″ |
| Cable drop | 59″ adjustable — extendable on request |
| Bulb base | E26 (US/CA) or E27 (EU/AU) |
| Light source | LED or Edison filament bulb (not included) — exposed below hub |
| Voltage | AC 110–240V |
| Assembly | Required — ships flat-packed. Watch assembly video before unpacking. |
| Control | Standard wall switch (not included) |
| Wiring | Hardwired |
| Mounting | Ceiling pendant |
| Environment | Indoor only — keep away from cooking steam and moisture |
| Body & shade finish | Brown (kraft paper) · Antique Brass (hub) |
| Certification | North America · EU · AU · Saudi Arabia |
Expect 20–40 minutes for a first-time assembly. The process involves attaching the hub to the ceiling canopy, then spreading and positioning each paper petal around the hub in the correct overlapping sequence. No tools are needed — the petals clip or wrap into position on the hub frame. Watching the full assembly video first will cut your setup time significantly. If a petal is bent or creased during assembly, it can be carefully refolded along its existing crease lines.
Use a soft dry brush or low-pressure compressed air to remove dust from the petal surfaces. Do not use damp cloths, water, or any cleaning solution on the kraft paper — moisture will cause the paper to warp, expand, and permanently lose its folded shape. Keep the lamp away from kitchen cooking vapour, bathroom steam, or any environment where moisture or grease particles are present.
Yes, considerably. Because the bulb hangs exposed below the paper disc rather than inside a shade, the bulb’s shape, size, and colour temperature are fully visible and integral to the lamp’s composition. A large filament globe (ST64 or G95 shape) at 2700 K sits proportionally well below the 60–100 cm disc and its warm amber filament complements the brown kraft paper. A small standard LED bulb will look underwhelming at scale. The bulb is a design choice, not just a functional component — choose the shape and tone deliberately.
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.
Téléchargements
Besoin d'un document différent ? Écrivez à info@docos.us — nous répondons en 1 jour ouvrable.
Expédition et retours
Politique d'expédition complète → · Politique de retour et remboursement →
Pourquoi Docos
Récemment consulté
Acheter par matière
Travertin303 pièces · parcourez le matériau
Bois833 pièces · parcourez le matériau
Albâtre240 pièces · parcourez le matériau
Verre1496 pièces · parcourez le matériau
Laiton551 pièces · parcourez le matériau
Rotin/Bambou138 pièces · parcourez le matériau
Aussi pour : CuisineEntrée/VestibuleSéjourSalle à mangerBureau/ÉtudeCouloir
Aide à la planification
Grandissons ensemble
Designers, architectes et professionnels du design : tarifs commerciaux exclusifs jusqu'à 35 % de réduction, accès anticipé aux collections et assistance dédiée aux comptes — les comptes vérifiés sont approuvés en 1 jour ouvrable.
Demander l'accès professionnelRevendeurs, boutiques spécialisées en mobilier et revendeurs en ligne : tarification de gros progressive et compétitive, option dropshipping, accès au catalogue et supports marketing — proposition commerciale sous 1 jour ouvrable.
Devenir partenaireInfluenceurs en design d'intérieur, blogueurs et créateurs en décoration : luminaires gratuits de nos dernières collections en échange de contenu honnête et magnifique, plus des liens d'affiliation.
Rejoindre le programme créateurClients privés : rendu 3D MAX gratuit de votre pièce en 24 h · couleur Pantone personnalisée, plus de 2 300 nuances