DCP-A1152-01
$338.00 USD $558.00 USD
| /
The Lydia Alabaster Pendant Lamp is a flat alabaster disc pendant — a slim round disc of natural alabaster with a brass cap, hung from a brass cord and canopy. An integrated LED lights the stone so the disc glows with a warm downward light. Two sizes: 11.8″ and 15.7″ diameter, both a low 3.7″ tall. Sized for a kitchen island, dining table, bedside, hallway, or entryway, it suits quiet-luxury, modern minimalist, Art Deco, Japandi, and Mediterranean rooms.
Two sizes — same flat alabaster disc, brass hardware, and integrated LED; only the diameter changes (both stay a low 3.7″ tall).
The Lydia reads as a glowing disc of stone — the integrated LED lights the alabaster so the underside throws a warm, low-profile downward glow. At just 3.7″ tall, it stays visually light and works where a deeper fixture would feel bulky.
11.8″ over a bedside, hallway, breakfast nook, or small island — or cluster several down a longer counter; 15.7″ as a single pendant over a kitchen island, dining table, or entryway. Hang the bottom of the disc 30–36″ above an island or table; for multiples, space them about 24–30″ apart. The brass-and-alabaster pairing suits quiet-luxury, modern minimalist, Art Deco, Japandi, and Mediterranean rooms, alongside marble, wood, and warm-metal accents. Email info@docos.us for multiples over a long island or trade pricing.
Technical reference and care guides for the Lydia Alabaster Pendant Lamp. Need a doc that's not listed? Email info@docos.us.
Hand-cut alabaster lighting that glows from within — chandeliers, pendants, sconces, and lamps, each carved from a single block of natural stone.
Alabaster can't be moulded or mass-pressed — it is cut. Every shade starts as solid stone and is worked by hand until it's thin enough to glow evenly. That's why no two are the same.
Blocks of natural alabaster are extracted and graded for translucency and the quality of their veining before any cutting begins.
Each block is sliced and turned or carved to form, then hollowed so a bulb can sit behind the stone wall.
The walls are sanded to an even thickness so light passes through without dark patches, then polished by hand.
Fitted with brass hardware and wired to a 120V, ETL-compliant build, then inspected before it ships.
Raw alabaster blocks and hand-turned shades in our workshop — each piece is cut, hollowed, and finished by hand before it is wired and shipped.
Light passes through the stone itself — the lit-from-inside quality you can't get from glass or acrylic.
Cut from a solid block, so the cloud-like veining is its own. No two alabaster fixtures are identical.
The stone scatters light rather than aiming it. Pair with a 2700K bulb; most fixtures dim on a compatible LED dimmer.
A soft accent beside stronger overhead light — at home with wood, linen, and brass in modern interiors.
Switched off, an alabaster fixture is a quiet stone object. Switched on, the whole piece glows — sculpture you happen to be able to turn on.
Chandeliers, pendants, sconces, table and floor lamps — all cut from natural alabaster, most paired with brass. Dozens of pieces in all.
Hang a linear pendant or chandelier roughly 30–36″ above the surface. For a 6–8′ island, size the fixture or cluster to about two-thirds the counter length.
Two-story spaces suit a tiered chandelier — Corbett or Miira. Keep the lowest point at least 7′ off the floor in a walkway.
A wall sconce — Ando, Marmo, Velora — frees the nightstand and adds the soft accent layer. Plug-in versions skip the hardwiring.
A table lamp — Marie, Pico — anchors a reading corner with warm light beside your overheads.
Exact dimensions, base, and finish live on each product page. The below holds across the range for the US market.
Alabaster is a natural stone — surface variation and veining are inherent to the material, not defects. Your fixture's pattern will be its own.
| Shade material | Natural alabaster, hand-cut (veining varies by piece) |
| Hardware | Brass or metal; finish varies by model |
| Light source | E26 or G9 base depending on fixture (see product page) |
| Voltage | 120V, US standard |
| Dimming | Dimmable with a compatible LED dimmer or bulb |
| Bulb colour | 2700K warm-white recommended to preserve the stone tone |
| Mounting | Hardwired and plug-in options across the range |
| Use location | Indoor, dry / damp locations |
| Certification | ETL Certified for North American safety standards |
| After-sale | 30-day returns · free shipping on all US orders |
Send a photo, sketch, or dimensions and our designers render any alabaster fixture in your actual space, to scale, within 24 hours. No deposit, unlimited revisions.
Alabaster is a solid, fine-grained stone with real weight — not fragile in normal use. It is softer than marble, so avoid knocks and harsh chemical cleaners. A soft, dry cloth keeps it looking right for years.
No — and that's by design. Each shade is cut from natural stone, so the veining and tone are unique to your piece. The product photo shows a representative example; yours will have its own distinct veining.
Use a 2700K warm-white LED to bring out the honeyed, candle-like tone in the stone. Cooler bulbs make alabaster look gray. Most fixtures take an E26 or G9 base — check the product page — and dim with a compatible LED dimmer.
Chandeliers (Corbett, Kurve, Miira) suit dining rooms and two-story foyers; pendants suit kitchen islands; sconces suit bedsides and hallways. Send us your dimensions for a free 3D preview to scale before you order.
Free shipping on all US orders, 30-day returns, and ETL Certified fixtures held in a US warehouse in Halethorpe, MD. Questions? Email info@docos.us or call +1 800-716-3167, Mon–Fri 9am–6pm EST.
Outfitted with LED technology for a more
powerful and energy-efficient design.
Express Delivery / Free Shipping
For All Orders.
Whether as a statement piece or a subtle accent, its adaptable design seamlessly complements various interior styles, from modern to classic.
