使用代码 DOCOS10 享受首次订单9折优惠 立即购物

全部订单免费配送 立即购物

30天退货政策 | ETL认证 | 24/7客服支持

Mayville 石灰华壁灯

DCW-A4917-01

$397.00 USD $537.00 USD

| /

灵感

Mayville 石灰华壁灯采用弯曲的黄铜臂从椭圆形黄铜背板延伸至圆形椭圆形西班牙石灰华灯罩,背板上集成拉链开关,可直接在灯具处控制开关。石灰华天然纹理柔和光线,呈现温暖均匀的光晕,完美适用于床头阅读壁灯、走廊点缀或客厅壁灯,营造农舍或过渡风格的空间。尺寸为宽7″ × 高8.2″(18 × 21厘米),可单独使用或配对安装。采用单个E26/E27灯座,配弯曲黄铜臂和椭圆形黄铜背板。

温馨提示

!
弯曲铜臂 + 椭圆形雪花石膏灯罩 · 拉链开关 · 硬接线 · 仅限室内干燥环境 一款单头壁灯,采用弯曲铜质臂、椭圆形西班牙雪花石膏灯罩,以及内置于椭圆形铜质背板的拉链开关。采用硬接线安装方式;建议由专业人士安装。雪花石膏为天然石材,纹理和色调因件而异。请在室内干燥环境中使用。完整的光源和电力详情请参阅下方规格说明。
核心特性

拉链开关
背板上的拉链开关可直接在灯具处开启和关闭,无需另配墙面开关。
圆形椭圆形石灰华灯罩
饱满的椭圆形西班牙石灰华灯罩柔和光线;纹理和色调因件而异。
弧形黄铜臂
弯曲的黄铜臂将椭圆形背板连接至灯罩,呈现经典壁灯造型。
尺寸与安装

单一尺寸 — 适合在床头、镜前或走廊安装单个灯具,或成对安装。

尺寸 规格尺寸
总体尺寸 W7″ × H8.2″ (18 × 21cm)
规格参数

灯具类型
壁灯 · 单头 · 拉链开关
材质与饰面
弯曲黄铜臂配椭圆形西班牙雪花石膏(天然石材)灯罩,安装在椭圆形黄铜背板上
光源
1 × E26/E27 插座
安装方式
椭圆形黄铜背板 · 硬接至墙面接线盒
开关
拉链开关,内置于背板
功率
交流电 110–240V · 室内干燥环境专用
安装
建议专业安装
保养
用软干布擦拭白玉石灯罩和黄铜臂 · 不使用强力清洁剂 · 保持干燥、室内使用
注意
雪花石膏为天然石材 — 纹理和色调因件而异
认证
符合北美、澳大利亚、欧洲和中东认证标准
设计风格
田园风格 过渡风格 有机风格
适用场景
床头柜旁、走廊或客厅 · 阅读灯和装饰灯
下载资源

Mayville雪花石膏壁灯的技术参考文档和设置文件。未找到您需要的文档?请发送邮件至info@docos.us

常见问题

尺寸是多少,适合安装在哪里?
尺寸为W7″ × H8.2″ (18 × 21cm) — 适合床头柜旁、走廊或客厅使用,可单独安装或成对安装。
如何打开和关闭灯?
背板上的拉链开关直接控制灯具 — 无需额外的墙面开关。
它使用什么灯泡?
采用1 × E26或E27灯头。
雪花石膏会与照片相匹配吗?
石膏是天然石材,每件产品的纹理和色调各不相同——您收到的灯罩将与照片相似,但不完全相同。
它是硬接的吗?
是的——它硬接线连接到墙面接线盒。建议由专业人士安装。
如何清洁?
用柔软干布擦拭 雪花石膏 灯罩和 黄铜 臂,避免使用强力清洁剂。保持灯具 在室内干燥环境中使用
Alabaster — Natural Stone Lighting

The light lives
in the stone.

Hand-cut alabaster lighting that glows from within — chandeliers, pendants, sconces, and lamps, each carved from a single block of natural stone.

Alabaster lighting collection showcase — chandelier glowing from within
Hand-cut natural stone Warm 2700K glow ETL Certified Full collection
The Craft

From a block of stone
to light in your room.

Alabaster can't be moulded or mass-pressed — it is cut. Every shade starts as solid stone and is worked by hand until it's thin enough to glow evenly. That's why no two are the same.

01

Quarried

Blocks of natural alabaster are extracted and graded for translucency and the quality of their veining before any cutting begins.

02

Cut & shaped

Each block is sliced and turned or carved to form, then hollowed so a bulb can sit behind the stone wall.

03

Hand-finished

The walls are sanded to an even thickness so light passes through without dark patches, then polished by hand.

04

Wired & assembled

Fitted with brass hardware and wired to a 120V, ETL-compliant build, then inspected before it ships.

Close detail of hand-carved alabaster showing natural veining and translucency
Inside the Workshop

Cut and finished by hand.

Alabaster workshop photo 1
Alabaster workshop photo 2
Alabaster workshop photo 3
Alabaster workshop photo 4
Alabaster workshop photo 5

Raw alabaster blocks and hand-turned shades in our workshop — each piece is cut, hollowed, and finished by hand before it is wired and shipped.

Why Alabaster

What makes it read as something rarer.

Translucent, not opaque

Light passes through the stone itself — the lit-from-inside quality you can't get from glass or acrylic.

Veining unique to your piece

Cut from a solid block, so the cloud-like veining is its own. No two alabaster fixtures are identical.

Warm and glare-free

The stone scatters light rather than aiming it. Pair with a 2700K bulb; most fixtures dim on a compatible LED dimmer.

Made for layered rooms

A soft accent beside stronger overhead light — at home with wood, linen, and brass in modern interiors.

Lit From Within

It doesn't light the room.
It becomes the light.

Switched off, an alabaster fixture is a quiet stone object. Switched on, the whole piece glows — sculpture you happen to be able to turn on.

The Collection

A gallery of carved light.

Chandeliers, pendants, sconces, table and floor lamps — all cut from natural alabaster, most paired with brass. Dozens of pieces in all.

Find My Size

Which alabaster light
for which room.

Dining & Island

Hang a linear pendant or chandelier roughly 30–36″ above the surface. For a 6–8′ island, size the fixture or cluster to about two-thirds the counter length.

Foyer & Stairwell

Two-story spaces suit a tiered chandelier — Corbett or Miira. Keep the lowest point at least 7′ off the floor in a walkway.

Bedside & Hallway

A wall sconce — Ando, Marmo, Velora — frees the nightstand and adds the soft accent layer. Plug-in versions skip the hardwiring.

Living Room & Den

A table lamp — Marie, Pico — anchors a reading corner with warm light beside your overheads.

The Details

Specs across the collection.

Exact dimensions, base, and finish live on each product page. The below holds across the range for the US market.

Alabaster is a natural stone — surface variation and veining are inherent to the material, not defects. Your fixture's pattern will be its own.

Shade materialNatural alabaster, hand-cut (veining varies by piece)
HardwareBrass or metal; finish varies by model
Light sourceE26 or G9 base depending on fixture (see product page)
Voltage120V, US standard
DimmingDimmable with a compatible LED dimmer or bulb
Bulb colour2700K warm-white recommended to preserve the stone tone
MountingHardwired and plug-in options across the range
Use locationIndoor, dry / damp locations
CertificationETL Certified for North American safety standards
After-sale30-day returns · free shipping on all US orders
Before You Buy

See it in your room first.

Send a photo, sketch, or dimensions and our designers render any alabaster fixture in your actual space, to scale, within 24 hours. No deposit, unlimited revisions.

Questions

Alabaster lighting, answered.

Is alabaster lighting durable, or does the stone chip easily?

Alabaster is a solid, fine-grained stone with real weight — not fragile in normal use. It is softer than marble, so avoid knocks and harsh chemical cleaners. A soft, dry cloth keeps it looking right for years.

Will my alabaster fixture look exactly like the photo?

No — and that's by design. Each shade is cut from natural stone, so the veining and tone are unique to your piece. The product photo shows a representative example; yours will have its own distinct veining.

What bulb and colour temperature work best with alabaster?

Use a 2700K warm-white LED to bring out the honeyed, candle-like tone in the stone. Cooler bulbs make alabaster look gray. Most fixtures take an E26 or G9 base — check the product page — and dim with a compatible LED dimmer.

Which alabaster fixture should I choose for my room size?

Chandeliers (Corbett, Kurve, Miira) suit dining rooms and two-story foyers; pendants suit kitchen islands; sconces suit bedsides and hallways. Send us your dimensions for a free 3D preview to scale before you order.

What are the shipping, returns, and certification details?

Free shipping on all US orders, 30-day returns, and ETL Certified fixtures held in a US warehouse in Halethorpe, MD. Questions? Email info@docos.us or call +1 800-716-3167, Mon–Fri 9am–6pm EST.

📞
Toll-Free
💬
WhatsApp
📧
Email
🕐
Hours
Mon–Fri
9am – 6pm EST
📍
US Warehouse
Halethorpe
MD 21227

Why We Love It

Premium LED Technology

Energy-efficient LEDs deliver a brighter, longer-lasting glow with none of the upkeep of traditional bulbs.

Free & Fast Shipping

Every order ships free with express delivery, no minimums and no hidden fees.

30-Day Hassle-Free Returns

Not the right fit? Send it back within 30 days for a full refund, no questions asked.