使用代码 DOCOS10 享受首次订单9折优惠 立即购物

全部订单免费配送 立即购物

30天退货政策 | ETL认证 | 24/7客服支持

La Fleur 雪花石膏半吸顶灯

DCC-A1524-01

$567.00 USD $849.00 USD

| /

灵感

La Fleur 雪花石膏吸顶灯天然雪花石膏精心雕刻而成,呈柔和的圆形花瓣环绕中心球体,内部发光使石材温柔发光。铜质顶盖使灯贴近天花。单一规格,直径 30厘米 × 宽 18.5厘米(∅11.8″ × W7.3″),单只 G9 灯泡。适合卧室、走廊、玄关、壁橱、婴儿房或小客厅的吸顶灯,提供柔和的环境光,具有有机现代、沿海和日式简约风格。其紧凑的低矮外形也适合干燥区安装;如果房间较大,可安装多盏或添加其他照明。如需团购报价,请邮件至 info@docos.us

有用信息

!
天然雪花石膏花卉主体 + 黄铜底盘 · 1 × G9 灯泡配备且可更换 · 吸顶式,硬接线 · 室内干燥环境专用 雪花石膏是天然多孔石材,纹理和色调因件而异 — 仅干布除尘,切勿用水。黄铜随时间推移会形成自然铜绿(干布擦拭,勿用强力抛光剂)。单个 G9 灯泡提供柔和的环境光/重点照明,非明亮工作光。硬接线至标准天花板接线盒;符合北美、澳大利亚、欧洲及中东认证(110–240V);建议由持证电工安装。
主要特征

雪花石膏雕刻花卉
天然雪花石膏雕刻成花卉形态,圆润花瓣环绕中心球体 — 实心、具雕塑感的石材。
透过纹理石材发光
内部照明使透光雪花石膏散发温暖光泽;纹理因件而异。
G9 灯泡、黄铜底盘、吸顶式
单个 G9 灯泡(配备且可更换),暖白色;黄铜底盘将其固定为吸顶式(深度约 7.3″)。
规格

灯具类型
吸顶式天花板灯 · 雕刻天然雪花石膏花卉主体 + 黄铜底盘 · 硬接线
材质与饰面
天然雪花石膏(雕刻花卉主体)+ 黄铜(底盘及五金件) · 雪花石膏纹理和色调因件而异 · 黄铜形成自然铜绿
尺寸
直径 30cm × 深 18.5cm(∅11.8″ × 深 7.3″) · 吸顶安装,距天花板下延约 7.3″
光源
1 × G9 线电压双针插座 · 在美国广泛可得 · LED 灯泡配备且可更换 · 暖白色 · 请使用符合您地区电压等级的 G9 灯泡
安装方式
贴顶安装,硬接线至标准顶部接线盒 · 室内干燥环境专用 · 110–240V(多地区通用)
认证
认证:北美 · 澳大利亚 · 欧洲 · 中东
保养
雪花石膏:仅限室内干燥环境,用干软布除尘——切勿用水(多孔) · 黄铜:干布擦拭,自然铜绿,无需强力抛光
设计风格
有机现代 当代 沿海风格 日式北欧 北欧风格 极简主义
下载

La Fleur 雪花石膏吸顶灯的技术参考和 3D 文件。需要未列出的文档?请发送邮件至 info@docos.us

常见问题

主体采用什么材料制成,真的会发光吗?
主体采用雕刻天然雪花石膏 — 真实的透光石材。内部照明使其发出温暖光泽,透过石材发光,且纹理和色调因件而异,每件都独一无二。关灯时呈现为实心石制花卉。
它使用什么灯泡——包含在内吗?
它采用1 × G9 线电压双针底座,在美国广泛可得G9 LED 灯泡配备且可更换,暖白色。由于 G9 是线电压,请使用符合您当地电压等级的 G9 灯泡。
我能在浴室使用它吗,如何清洁?
它仅适用于室内干燥环境。雪花石膏多孔且未做防潮等级,适合干燥区域粉房,但不适合浴缸/淋浴上方有水蒸气的环境或户外安装。用软布除尘 — 切勿用水。用干布擦拭黄铜底盘。
它如何安装,适合什么尺寸的房间?
它是吸顶式硬接线至标准天花板接线盒,紧贴天花板安装(下延约7.3″)。符合北美、澳大利亚、欧洲及中东认证(110–240V);建议由持证电工安装。11.8″ 雪花石膏主体内的单个 G9 灯泡提供柔和环境光 — 若空间较大,可使用多盏灯或添加其他照明。
Alabaster — Natural Stone Lighting

The light lives
in the stone.

Hand-cut alabaster lighting that glows from within — chandeliers, pendants, sconces, and lamps, each carved from a single block of natural stone.

Alabaster lighting collection showcase — chandelier glowing from within
Hand-cut natural stone Warm 2700K glow ETL Certified Full collection
The Craft

From a block of stone
to light in your room.

Alabaster can't be moulded or mass-pressed — it is cut. Every shade starts as solid stone and is worked by hand until it's thin enough to glow evenly. That's why no two are the same.

01

Quarried

Blocks of natural alabaster are extracted and graded for translucency and the quality of their veining before any cutting begins.

02

Cut & shaped

Each block is sliced and turned or carved to form, then hollowed so a bulb can sit behind the stone wall.

03

Hand-finished

The walls are sanded to an even thickness so light passes through without dark patches, then polished by hand.

04

Wired & assembled

Fitted with brass hardware and wired to a 120V, ETL-compliant build, then inspected before it ships.

Close detail of hand-carved alabaster showing natural veining and translucency
Inside the Workshop

Cut and finished by hand.

Alabaster workshop photo 1
Alabaster workshop photo 2
Alabaster workshop photo 3
Alabaster workshop photo 4
Alabaster workshop photo 5

Raw alabaster blocks and hand-turned shades in our workshop — each piece is cut, hollowed, and finished by hand before it is wired and shipped.

Why Alabaster

What makes it read as something rarer.

Translucent, not opaque

Light passes through the stone itself — the lit-from-inside quality you can't get from glass or acrylic.

Veining unique to your piece

Cut from a solid block, so the cloud-like veining is its own. No two alabaster fixtures are identical.

Warm and glare-free

The stone scatters light rather than aiming it. Pair with a 2700K bulb; most fixtures dim on a compatible LED dimmer.

Made for layered rooms

A soft accent beside stronger overhead light — at home with wood, linen, and brass in modern interiors.

Lit From Within

It doesn't light the room.
It becomes the light.

Switched off, an alabaster fixture is a quiet stone object. Switched on, the whole piece glows — sculpture you happen to be able to turn on.

The Collection

A gallery of carved light.

Chandeliers, pendants, sconces, table and floor lamps — all cut from natural alabaster, most paired with brass. Dozens of pieces in all.

Find My Size

Which alabaster light
for which room.

Dining & Island

Hang a linear pendant or chandelier roughly 30–36″ above the surface. For a 6–8′ island, size the fixture or cluster to about two-thirds the counter length.

Foyer & Stairwell

Two-story spaces suit a tiered chandelier — Corbett or Miira. Keep the lowest point at least 7′ off the floor in a walkway.

Bedside & Hallway

A wall sconce — Ando, Marmo, Velora — frees the nightstand and adds the soft accent layer. Plug-in versions skip the hardwiring.

Living Room & Den

A table lamp — Marie, Pico — anchors a reading corner with warm light beside your overheads.

The Details

Specs across the collection.

Exact dimensions, base, and finish live on each product page. The below holds across the range for the US market.

Alabaster is a natural stone — surface variation and veining are inherent to the material, not defects. Your fixture's pattern will be its own.

Shade materialNatural alabaster, hand-cut (veining varies by piece)
HardwareBrass or metal; finish varies by model
Light sourceE26 or G9 base depending on fixture (see product page)
Voltage120V, US standard
DimmingDimmable with a compatible LED dimmer or bulb
Bulb colour2700K warm-white recommended to preserve the stone tone
MountingHardwired and plug-in options across the range
Use locationIndoor, dry / damp locations
CertificationETL Certified for North American safety standards
After-sale30-day returns · free shipping on all US orders
Before You Buy

See it in your room first.

Send a photo, sketch, or dimensions and our designers render any alabaster fixture in your actual space, to scale, within 24 hours. No deposit, unlimited revisions.

Questions

Alabaster lighting, answered.

Is alabaster lighting durable, or does the stone chip easily?

Alabaster is a solid, fine-grained stone with real weight — not fragile in normal use. It is softer than marble, so avoid knocks and harsh chemical cleaners. A soft, dry cloth keeps it looking right for years.

Will my alabaster fixture look exactly like the photo?

No — and that's by design. Each shade is cut from natural stone, so the veining and tone are unique to your piece. The product photo shows a representative example; yours will have its own distinct veining.

What bulb and colour temperature work best with alabaster?

Use a 2700K warm-white LED to bring out the honeyed, candle-like tone in the stone. Cooler bulbs make alabaster look gray. Most fixtures take an E26 or G9 base — check the product page — and dim with a compatible LED dimmer.

Which alabaster fixture should I choose for my room size?

Chandeliers (Corbett, Kurve, Miira) suit dining rooms and two-story foyers; pendants suit kitchen islands; sconces suit bedsides and hallways. Send us your dimensions for a free 3D preview to scale before you order.

What are the shipping, returns, and certification details?

Free shipping on all US orders, 30-day returns, and ETL Certified fixtures held in a US warehouse in Halethorpe, MD. Questions? Email info@docos.us or call +1 800-716-3167, Mon–Fri 9am–6pm EST.

📞
Toll-Free
💬
WhatsApp
📧
Email
🕐
Hours
Mon–Fri
9am – 6pm EST
📍
US Warehouse
Halethorpe
MD 21227

Why We Love It

Premium LED Technology

Energy-efficient LEDs deliver a brighter, longer-lasting glow with none of the upkeep of traditional bulbs.

Free & Fast Shipping

Every order ships free with express delivery, no minimums and no hidden fees.

30-Day Hassle-Free Returns

Not the right fit? Send it back within 30 days for a full refund, no questions asked.