使用代码 DOCOS10 享受首次订单9折优惠 立即购物

全部订单免费配送 立即购物

30天退货政策 | ETL认证 | 24/7客服支持

Montera 白色大理石壁灯

DCW-A1704-01

$614.00 USD $834.00 USD

| /

设计灵感

The Montera 天然石膏圆锥形壁灯 在一个车制黄铜灯体上安装了一个锥形天然石膏灯罩 — 扁平的、土星般的圆盘,下方有一个尖形顶钮 — 覆盖着圆形背板。半透明天然石膏点亮时会发光并显示天然纹理。选择 1 或 2 盏灯(L5.9″ 或 L13.4″ / 15 或 34 厘米宽)。作为卧室、走廊或客厅用的黄铜与天然石膏壁灯,它可用作床头灯、入口或楼梯间装饰,或者成对地装在镜子两侧。每盏灯采用单个 E14 灯座(包含灯泡);硬连接到墙壁电源盒,供室内使用。

温馨提示

!
黄铜 + 天然石膏 · 锥形灯罩 · 1 或 2 盏灯 · E14(包含灯泡)· W8.3″ 伸出距离 · 硬连接 · 仅限室内干燥环境 一款壁灯,配有黄铜圆形背板和车制的土星形黄铜灯体,下方有尖形顶钮,顶部装有锥形天然石膏灯罩,点亮时会发光并显示天然纹理。每盏灯配备1 × E14 小口径灯座,包含灯泡(E14 是欧洲小口径灯座;使用 E14 替换灯泡)。它硬连接到墙壁接线盒;建议由专业人员安装。天然石膏是天然石材,纹理因件而异。请保持室内和干燥。AC 110–240V。
主要特性

锥形天然石膏灯罩
一个锥形天然石膏灯罩,点亮时发出柔和的光线,显示天然纹理 — 每一个都独一无二 — 开放式底部将光向下散射。
车制黄铜土星形灯体
一个车制的土星形黄铜灯体,下方有尖形顶钮,装在圆形黄铜背板上 — 清晰、精密的造型。
1 / 2 盏灯,E14 灯泡包含
选择1 或 2 盏灯。每个都是E14 小口径灯座,包含灯泡,硬连接到墙壁接线盒。
尺寸及安装

选择 1 或 2 盏灯。高度和伸出距离在两种选择上相同;仅沿墙的宽度变化。

灯数 宽度(沿墙) 突出深度 高度
1 盏灯 L5.9″ (15 厘米) W8.3″ (21 厘米) H15.4″ (39 厘米)
2 盏灯 L13.4″ (34 厘米) W8.3″ (21 厘米) H15.4″ (39 厘米)
!
硬连接 · E14(包含灯泡)· 黄铜 + 天然石膏 · 仅限室内干燥环境硬连接到墙壁接线盒,由墙壁开关控制;建议由专业人员安装。请注意从墙壁伸出 8.3″ (21 厘米)的距离。一般用途时,请将背板安装在距地面约 60–66″ 处。每盏灯为 E14,包含灯泡。天然石膏是柔软的天然石材 — 轻轻擦拭灰尘,用柔软干布擦拭黄铜;不使用强力清洁剂。保持室内和干燥。如有其他需求,请发送邮件至 info@docos.us
规格参数

灯具类型
壁灯 · 1 或 2 盏灯 · 硬连接
材质与饰面
黄铜圆形背板和车制土星形灯体,下方有尖形顶钮 + 天然石膏锥形灯罩
光源
1 或 2 × E14 小口径灯座 · 灯泡包含 · (E14 = 欧洲小口径灯座;使用 E14 替换灯泡)
尺寸
1 盏灯 L5.9″ (15 厘米) · 2 盏灯 L13.4″ (34 厘米) · 两种 W8.3″ (21 厘米) 伸出距离 × H15.4″ (39 厘米)
安装方式
黄铜圆形背板 · 硬接线连接至墙面接线盒
功率
硬接线 · 通过墙壁开关控制开/关(不含开关)· 交流 110–240V · 仅限室内干燥环境使用
安装
建议由专业人士安装 · 距地面~60-66″处安装供一般使用
保养
轻轻除尘白石膏·用软干布擦拭黄铜·勿用强力清洁剂·保持干燥,仅限室内使用
设计风格
过渡风格 现代有机 中世纪现代 复古 艺术装饰
适用场景
床头、走廊、入口、客厅、楼梯间,或镜子或艺术品两侧
下载资源

Montera 天然石膏壁灯的技术参考和设置文件。需要未列出的文档?请发送邮件至 info@docos.us

常见问题

有哪些尺寸和灯数可选?
两种选择:1 盏灯 L5.9″ (15 厘米)2 盏灯 L13.4″ (34 厘米)宽 — 两种均为 H15.4″ (39 厘米) 高,从墙壁伸出 W8.3″ (21 厘米)
灯泡是否已附带,使用什么类型的灯泡?
是的 — 每盏灯都是E14 小口径灯座,包含灯泡(根据尺寸包含 1 或 2 个灯泡)。E14 是欧洲小口径灯座,所以请使用E14 替换灯泡
白色大理石是否会发光,光线照射方向如何?
是的 — 半透明天然石膏点亮时发出柔和的光,灯罩的开放式底部也将光向下散射,适合床头或装饰照明。
它是硬接线的吗,谁应该安装?
硬接线连接至墙壁接线盒(黄铜背板),通过墙面开关控制。建议专业安装。
如何清洁白石膏和黄铜?石纹会有差异吗?
白玉髓是天然石材,因此每件产品的纹理和色调都不同。轻轻拂去灰尘,用柔软干布擦拭黄铜部分;避免使用刺激性清洁剂。保持灯具室内干燥
Alabaster — Natural Stone Lighting

The light lives
in the stone.

Hand-cut alabaster lighting that glows from within — chandeliers, pendants, sconces, and lamps, each carved from a single block of natural stone.

Alabaster lighting collection showcase — chandelier glowing from within
Hand-cut natural stone Warm 2700K glow ETL Certified Full collection
The Craft

From a block of stone
to light in your room.

Alabaster can't be moulded or mass-pressed — it is cut. Every shade starts as solid stone and is worked by hand until it's thin enough to glow evenly. That's why no two are the same.

01

Quarried

Blocks of natural alabaster are extracted and graded for translucency and the quality of their veining before any cutting begins.

02

Cut & shaped

Each block is sliced and turned or carved to form, then hollowed so a bulb can sit behind the stone wall.

03

Hand-finished

The walls are sanded to an even thickness so light passes through without dark patches, then polished by hand.

04

Wired & assembled

Fitted with brass hardware and wired to a 120V, ETL-compliant build, then inspected before it ships.

Close detail of hand-carved alabaster showing natural veining and translucency
Inside the Workshop

Cut and finished by hand.

Alabaster workshop photo 1
Alabaster workshop photo 2
Alabaster workshop photo 3
Alabaster workshop photo 4
Alabaster workshop photo 5

Raw alabaster blocks and hand-turned shades in our workshop — each piece is cut, hollowed, and finished by hand before it is wired and shipped.

Why Alabaster

What makes it read as something rarer.

Translucent, not opaque

Light passes through the stone itself — the lit-from-inside quality you can't get from glass or acrylic.

Veining unique to your piece

Cut from a solid block, so the cloud-like veining is its own. No two alabaster fixtures are identical.

Warm and glare-free

The stone scatters light rather than aiming it. Pair with a 2700K bulb; most fixtures dim on a compatible LED dimmer.

Made for layered rooms

A soft accent beside stronger overhead light — at home with wood, linen, and brass in modern interiors.

Lit From Within

It doesn't light the room.
It becomes the light.

Switched off, an alabaster fixture is a quiet stone object. Switched on, the whole piece glows — sculpture you happen to be able to turn on.

The Collection

A gallery of carved light.

Chandeliers, pendants, sconces, table and floor lamps — all cut from natural alabaster, most paired with brass. Dozens of pieces in all.

Find My Size

Which alabaster light
for which room.

Dining & Island

Hang a linear pendant or chandelier roughly 30–36″ above the surface. For a 6–8′ island, size the fixture or cluster to about two-thirds the counter length.

Foyer & Stairwell

Two-story spaces suit a tiered chandelier — Corbett or Miira. Keep the lowest point at least 7′ off the floor in a walkway.

Bedside & Hallway

A wall sconce — Ando, Marmo, Velora — frees the nightstand and adds the soft accent layer. Plug-in versions skip the hardwiring.

Living Room & Den

A table lamp — Marie, Pico — anchors a reading corner with warm light beside your overheads.

The Details

Specs across the collection.

Exact dimensions, base, and finish live on each product page. The below holds across the range for the US market.

Alabaster is a natural stone — surface variation and veining are inherent to the material, not defects. Your fixture's pattern will be its own.

Shade materialNatural alabaster, hand-cut (veining varies by piece)
HardwareBrass or metal; finish varies by model
Light sourceE26 or G9 base depending on fixture (see product page)
Voltage120V, US standard
DimmingDimmable with a compatible LED dimmer or bulb
Bulb colour2700K warm-white recommended to preserve the stone tone
MountingHardwired and plug-in options across the range
Use locationIndoor, dry / damp locations
CertificationETL Certified for North American safety standards
After-sale30-day returns · free shipping on all US orders
Before You Buy

See it in your room first.

Send a photo, sketch, or dimensions and our designers render any alabaster fixture in your actual space, to scale, within 24 hours. No deposit, unlimited revisions.

Questions

Alabaster lighting, answered.

Is alabaster lighting durable, or does the stone chip easily?

Alabaster is a solid, fine-grained stone with real weight — not fragile in normal use. It is softer than marble, so avoid knocks and harsh chemical cleaners. A soft, dry cloth keeps it looking right for years.

Will my alabaster fixture look exactly like the photo?

No — and that's by design. Each shade is cut from natural stone, so the veining and tone are unique to your piece. The product photo shows a representative example; yours will have its own distinct veining.

What bulb and colour temperature work best with alabaster?

Use a 2700K warm-white LED to bring out the honeyed, candle-like tone in the stone. Cooler bulbs make alabaster look gray. Most fixtures take an E26 or G9 base — check the product page — and dim with a compatible LED dimmer.

Which alabaster fixture should I choose for my room size?

Chandeliers (Corbett, Kurve, Miira) suit dining rooms and two-story foyers; pendants suit kitchen islands; sconces suit bedsides and hallways. Send us your dimensions for a free 3D preview to scale before you order.

What are the shipping, returns, and certification details?

Free shipping on all US orders, 30-day returns, and ETL Certified fixtures held in a US warehouse in Halethorpe, MD. Questions? Email info@docos.us or call +1 800-716-3167, Mon–Fri 9am–6pm EST.

📞
Toll-Free
💬
WhatsApp
📧
Email
🕐
Hours
Mon–Fri
9am – 6pm EST
📍
US Warehouse
Halethorpe
MD 21227

Why We Love It

Premium LED Technology

Energy-efficient LEDs deliver a brighter, longer-lasting glow with none of the upkeep of traditional bulbs.

Free & Fast Shipping

Every order ships free with express delivery, no minimums and no hidden fees.

30-Day Hassle-Free Returns

Not the right fit? Send it back within 30 days for a full refund, no questions asked.