Lunessa Flush Mount

DCC-X0116-01

$386.00 USD $606.00 USD

| /

Inspiration

The Lunessa Flush Mount is a semi-flush ceiling light with a pleated fabric shade — a scalloped, petal-shaped shade in cream and champagne pleats with braided trim, hung close to the ceiling on a brass-tone metal canopy and short stem with a center finial. Light glows up and through the pleated fabric for a soft, even ambient wash. Two sizes (21.7″ / 25.6″ diameter), 3 × E27 with LED bulbs included. For a bedroom, hallway, foyer, dining room, or low-ceiling room. Grandmillennial, Traditional, French Country, Vintage, and Hollywood Regency style.

Good To Know

3 × E27 medium screw base · LED bulbs included · pleated fabric shade · brass-tone metal · hardwired semi-flush · indoor dry only Shade is pleated fabric in a scalloped petal shape (cream + champagne) with braided trim; fabric tone and pleating vary slightly piece to piece. Canopy, stem, and finial are brass-tone metal. Sockets are 3 × E27 (medium screw base) and accept standard US E26 bulbs; LED bulbs are included and replaceable — keep them LED to limit heat near the fabric. This is a semi-flush mount: it hangs a few inches below the ceiling on a short stem, so it suits roughly 8–10 ft ceilings. Hardwires to a standard ceiling junction box; licensed electrician recommended. Indoor dry locations only — not for bathrooms with shower steam or outdoor. Dust the fabric dry; wipe the metal with a dry cloth.

Key Features

Pleated Scalloped Fabric Shade

A petal-shaped pleated shade in cream and champagne with braided trim — the pleats diffuse the light into an even glow.

Brass-Tone Canopy & Finial

A warm brass-tone metal canopy, short stem, and center finial drop hold the shade and anchor the design at the ceiling.

Semi-Flush Ambient Glow

Mounts close to the ceiling and pushes a soft, even ambient light through the fabric — built for 8–10 ft ceilings where a pendant won't fit.

Available Sizes

Two sizes — same pleated scalloped shade, brass-tone metal, and E27 socket; only the diameter and height scale up. Choose by room size.

Size 1

Small — 21.7″ Dia

For a bedroom, hallway, entryway, or smaller dining area on a standard ceiling.

21.7″ Dia × 8.3″ H (D55 × H21 cm)
3 × E27 · bulbs included

Size 2

Large — 25.6″ Dia

For a dining room, larger foyer, or living room that needs more presence and spread.

25.6″ Dia × 9.8″ H (D65 × H25 cm)
3 × E27 · bulbs included

Indoor dry locations · 8–10 ft ceilings As a semi-flush mount it hangs a few inches below the ceiling — best on 8–10 ft ceilings. The fabric shade is not damp-rated: fine in a bedroom, hallway, foyer, or dining room, but not for bathrooms with shower steam or any outdoor location.

Specifications

Fixture Type

Semi-flush mount ceiling light · hardwired · pleated fabric shade + brass-tone metal

Materials

Brass-tone metal canopy, stem & finial + pleated fabric shade · fabric tone varies slightly per piece

Small

21.7″ Dia × 8.3″ H (D55 × H21 cm) · 3 × E27

Large

25.6″ Dia × 9.8″ H (D65 × H25 cm) · 3 × E27

Light Source

3 × E27 medium screw base · accepts standard E26 bulbs · LED bulbs included & replaceable · 2700–3000K warm white

Finish

Warm brass-tone metal + cream / champagne pleated fabric

Mounting

Hardwired to standard ceiling junction box · semi-flush (short stem) · best for 8–10 ft ceilings · indoor dry only · 120V (US)

Care

Fabric: dust dry with a soft brush, don't soak · Metal: dry soft cloth, no abrasive polish

Design Style

Grandmillennial Traditional French Country Vintage Hollywood Regency Transitional

Best For

Bedroom, hallway, foyer / entryway, dining room, breakfast area, low-ceiling rooms

Use Case

The Lunessa sits close to the ceiling, so it lights a room where a hanging pendant or chandelier would be in the way — the pleated fabric shade softens the bulbs into an even ambient glow rather than a glare.

Small (21.7″) over a bedroom, hallway, entryway, or smaller dining area; Large (25.6″) over a dining room, larger foyer, or living room. Plan for 8–10 ft ceilings and center it on the room or table. The cream-and-champagne pleats and brass-tone metal read traditional and grandmillennial — pairs with millwork, wallpaper, antique wood, and warm-metal accents in bedrooms, foyers, and dining rooms. Email info@docos.us for the spec sheet, max wattage, or trade pricing.

Downloads

Technical reference and care guides for the Lunessa Flush Mount. Need a doc that's not listed? Email info@docos.us.

Hardwire semi-flush · PDF

Pending

Care Guide

Fabric & metal care · PDF

Pending

FAQ

Which size should I pick — 21.7″ or 25.6″?

Small (21.7″ / D55) suits a bedroom, hallway, entryway, or smaller dining area. Large (25.6″ / D65) suits a dining room, larger foyer, or living room that needs more spread. A common rule of thumb: add the room's length and width in feet and aim for roughly that number in inches of fixture diameter — center it on the room or over the table.

What bulbs does it use — are they included?

It uses 3 × E27 medium screw base bulbs, which are cross-compatible with standard US E26 — so US E26 replacements thread right in. LED bulbs are included and fully replaceable; a 2700–3000K warm white keeps the glow soft and the heat low near the fabric. For the max wattage per socket, see the spec sheet or email info@docos.us.

Is it a flush mount or a semi-flush — what ceiling height do I need?

It's a semi-flush mount: it hangs a few inches below the ceiling on a short stem rather than sitting fully flush. That makes it best for 8–10 ft ceilings. On an 8 ft ceiling it still clears walking head height in most rooms; on taller ceilings a pendant or chandelier may suit better.

Can I use it in a bathroom, and how do I clean the fabric?

Indoor dry locations only — the fabric shade is not damp-rated, so avoid bathrooms with shower steam and outdoor spots. Cleaning: dust the pleated fabric with a soft brush or a vacuum dusting attachment on low; don't soak it. Wipe the brass-tone metal with a dry soft cloth and skip abrasive polish, which can strip the finish.

How is it installed?

It's a hardwired semi-flush mount — the canopy attaches to a standard ceiling junction box and the shade hangs from the short stem. Licensed electrician recommended. Confirm your junction box is centered where you want the fixture before mounting. Indoor dry locations only.