Brimora Flush Mount

DCC-Z1131-01

$186.00 USD $266.00 USD

| /

Inspiration

The Brimora Flush Mount is a mushroom-shape ceiling light — a slim 17.3″ acrylic disk with a soft warm glow, topped by a small walnut wood sphere where it meets the ceiling. Choose all-walnut, or olive-green rim with a walnut sphere for a quiet color pop. Built-in LED, 49W × 2 (98W total), no bulbs to replace. For a hallway, foyer, bedroom, bathroom, closet, stairwell, or laundry room. Mid-century modern, mushroom-shape, modern farmhouse, and Japandi style.

Good To Know

Integrated LED (not replaceable) · 2 finish options · hardwired flush install · indoor dry only Light source is built in — two 49W warm-white LED modules (98W combined). There are no E26 sockets and no bulbs to change; if the LED fails after warranty, the entire fixture or driver module needs servicing. The fixture mounts flush against the ceiling through a standard junction box. The top walnut sphere is real wood — grain pattern varies slightly piece to piece, which is characteristic of natural wood, not a defect. The acrylic disk is shatter-resistant, safer than glass overhead, and diffuses the LED evenly. Have a licensed electrician install. Indoor, dry locations only (powder rooms OK; full bathrooms with shower or tub need a damp-rated fixture — this is not damp-rated by default).

Key Features

Mushroom Silhouette

A small walnut wood sphere sits where the fixture meets the ceiling, and a slim acrylic disk spreads outward below — reads as a quiet mushroom from below, mid-century modern from the side.

Built-In LED — 49W × 2

Two integrated 49W LED modules (98W combined) behind a shatter-resistant acrylic diffuser — bright, even ambient light without glare. No bulbs to buy or replace.

Two Finish Options

All-walnut for warm, monochromatic restraint, or olive-green rim with walnut sphere for a quiet color pop. Same dimensions, same LED output — only the rim color changes.

Available Finishes

Two color options — choose at checkout. Identical dimensions (17.3″ D × 7.3″ H) and identical 98W LED output; only the disk rim color changes.

Finish A

Full Walnut

Walnut wood sphere on top, walnut-toned rim around the acrylic disk. Warm, monochromatic, blends with wood floors and natural-tone interiors.

Walnut sphere · cream acrylic

Finish B

Olive Green + Walnut

Walnut wood sphere on top, olive-green rim around the acrylic disk. Pulls in the muted green that’s trending in modern interiors — quiet color, not loud.

Walnut + olive + cream

Specifications

Fixture Type

Flush mount ceiling light · mushroom-shape · integrated LED · hardwired

Main Materials

Aluminum + iron internal frame + acrylic diffuser disk + walnut wood sphere

Dimensions

17.3″ D × 7.3″ H (44 × 18.5 cm)

Finish A — Full Walnut

Walnut wood sphere + walnut-toned rim around cream acrylic diffuser

Finish B — Olive Green

Walnut wood sphere + olive-green metal rim around cream acrylic diffuser

Diffuser

Cream acrylic disk · shatter-resistant · evenly diffuses LED light

Light Source

Integrated LED · 49W × 2 modules (98W total) · not user-replaceable

Color Temperature

Warm white (approx. 3000K) · pairs naturally with the walnut tone

Brightness

Approximately equivalent to 5–7 traditional 100W incandescent bulbs · bright enough as a main room light

Mounting

Flush to ceiling, hardwired to standard junction box · indoor dry locations (powder room OK; not for full bathrooms with shower/tub)

Design Style

Mid-Century Modern Mushroom-Shape Modern Farmhouse Japandi Scandinavian Retro Modern

Best For

Hallway, foyer, bedroom, closet, stairwell, laundry room, powder room, kid’s room, pantry, small kitchen

Use Case

The Brimora is built for tight ceilings and quiet style — the disk sits flush against the ceiling, the walnut sphere reads as the only protrusion. At 17.3″ wide and 98W of warm LED output, it’s bright enough to act as a room’s primary light source in spaces up to roughly 150–200 square feet — standard hallways, foyers, smaller bedrooms, and most utility rooms.

The mushroom silhouette is a mid-century modern signature pulled forward into modern farmhouse and Japandi interiors. Walnut + acrylic + a touch of optional olive green pairs with white oak floors, painted shaker millwork, raw linen, terracotta tile, warm-white paint, and stone-look quartz countertops — fitting mid-century hallways, modern farmhouse foyers, Japandi bedrooms, and Scandinavian kid’s rooms. The olive-green finish reads especially well in laundry rooms, kid’s rooms, or pantries where you want personality without a permanent commitment. For dimming, custom color temperature, or trade pricing, email info@docos.us.

Downloads

Technical reference and care guides for the Brimora Flush Mount. Need a doc that’s not listed? Email info@docos.us.

Wood, acrylic & metal · PDF

Pending

FAQ

Which finish should I pick — Walnut or Olive Green?

Pick by how much color you want. Full Walnut is warm and quiet — reads as a continuation of wood floors, oak millwork, and natural-tone interiors. Good if the room already has a lot going on. Olive Green + Walnut reads as a quiet color pop — the muted olive plays well in modern farmhouse, mid-century, and Scandinavian rooms without feeling loud. Good for laundry rooms, kid’s rooms, foyers, and pantries where a small dose of color brings personality.

Can the bulbs be replaced?

No — the LED is built in. Two 49W LED modules (98W total) are integrated and not user-serviceable. There are no E26 sockets and no bulbs to buy. If the LED fails within the warranty period, the entire fixture or driver module is serviced or replaced. Plan for this as a long-life fixture (typical integrated-LED flush mounts run 30,000–50,000 hours).

Is it bright enough to be a room’s main light?

Yes, for most rooms. 98W of LED output is roughly equivalent to 5–7 traditional 100W incandescent bulbs, which covers most spaces up to about 150–200 square feet (a standard hallway, foyer, bedroom, or laundry room). For larger living rooms or kitchens, pair with recessed cans or table lamps for layered light.

Can I use it in a bathroom?

Powder room (no shower) — yes. Full bathroom with a shower or tub — not recommended as a default since the fixture is not damp-rated. Humidity over time can warp the walnut sphere, mottle the wood finish, and affect the integrated LED driver. If you need a damp-rated version for a full bathroom, email info@docos.us before ordering to check availability.

Is it dimmable?

Dimmability of the integrated LED is not guaranteed by default. The factory driver may or may not be dimmable depending on shipment. If you need dimming (TRIAC or 0-10V), email info@docos.us before ordering so we can confirm or arrange a dimmable driver. Don’t pair a non-dimming driver with a wall dimmer — this can damage both the LED and the dimmer.