- Heim
-
Geschäft
- Blog
- Kontakt
-
Unsere Geschichte
- 3D MAX
- Lighting Projects
-
Your simple, step-by-step guide to keeping every fixture bright and beautiful.
Keeping your lighting clean doesn’t just improve brightness—it also extends the life of your fixtures and helps your home feel fresh. Whether you own a delicate acrylic shade or a crystal-clear glass shade, each material requires a slightly different cleaning approach. This guide walks you through the safest, most effective methods—with zero risk of scratches, yellowing, or damage.
Dust, cooking oil, fingerprints, and everyday pollutants can cling to lamp surfaces, making them look dull and reducing light output.
Clean lampshades = brighter rooms + better ambience + longer-lasting fixtures.
Acrylic is lightweight and stylish, but it scratches easily if cleaned the wrong way. Follow these safe methods:
🧼 What You’ll Need
✔️ Step-by-Step Instructions
Step 1: Turn Off the Power & Remove the Shade
Ensure the fixture is unplugged or switched off. After cooling, remove the acrylic shade carefully to avoid bending or cracking. (If you cannot remove the shade, use your ladder to access the fixture safely.)
Step 2: Dust First
Use a dry microfiber cloth or compressed air to remove loose dirt.
Avoid using paper towels—they can cause micro scratches.
Step 3: Prepare a Mild Soap Solution
Mix a few drops of dish soap with lukewarm water.
Never use hot water. High heat may warp acrylic.
Step 4: Gently Clean the Surface
Dip a soft sponge into the solution, squeeze out excess water, and lightly wipe the acrylic surface.
Go in straight lines—not circular motions—to avoid swirl marks.
Step 5: Rinse & Dry
Rinse with clean lukewarm water.
Pat dry with a microfiber cloth.
Avoid these at all costs—they damage acrylic:
These can cloud, crack, or permanently scratch the surface.
Glass is more durable and scratch-resistant, but still requires gentle care, especially with frosted or textured finishes.
🧼 What You’ll Need
Step 1: Removal or Safe Access
Always switch off the light and allow it to cool down before removing the glass shade. (If cleaning in place, use your ladder safely.)
Step 2: Soak in Warm Soapy Water
Fill a sink with warm water + mild dish soap.
Let the glass soak for 5–10 minutes to loosen dirt and grease.
Step 3: Clean with a Soft Sponge
Wipe gently—especially if the glass is frosted, ribbed, or hand-blown.
Step 4: Deep Clean (if needed)
For kitchen pendants or smoky rooms:
Mix 1 part vinegar + 3 parts water → wipe to remove grease.
Step 5: Rinse & Dry Thoroughly
Use a microfiber cloth to avoid streaks.
For small corners, cotton swabs work wonders.
These can scratch, dull, or damage special coatings.
Once your shade is clean and dry:
✔️ Check that no moisture remains
✔️ Make sure screws or clips are tightened properly
✔️ Wipe the bulb gently before reinstalling
✔️ Plug in / turn on the power after full reassembly
This ensures safety and maximum brightness.
A little routine care prevents stubborn buildup and keeps your light shining longer.
Consider replacing your shade if:
This also protects wiring and prevents overheating.
Both acrylic and glass lampshades can stay beautiful for years with the right cleaning routine. By using gentle tools, avoiding harsh chemicals, and cleaning regularly, you’ll maintain a bright, inviting home—while also extending the lifespan of your lighting fixtures.
Kommentare werden vor der Veröffentlichung genehmigt.
