What are the exact dimensions of the Avyra Wall Sconce?

The fixture body is 23cm diameter × 28cm height (9.1″ × 11″). The round brass backplate is 10cm diameter (3.9″).

What materials is the Avyra Wall Sconce made from?

It has a fabric shade with stitched rims, a solid wood arm, and a brass backplate with brass fittings. The shade is bound top and bottom with natural cord stitching.

What style is the Avyra Wall Sconce?

It's mid-century modern and japandi / wabi-sabi in style, featuring an empire-shaped fabric shade on a wooden arm with visible cord stitching details.

How does light spread from the Avyra Wall Sconce?

The shade is open at both ends, so the bulb washes the wall above and lights the surface below, with soft glow through the fabric itself.

Avyra Wall Sconce

DCW-M2202-01

$235.00 USD $375.00 USD

| /

Inspiration

The Avyra Wall Sconce brings the parasol shade of the Avyra family down to wall size. A small empire-shaped fabric shade is bound top and bottom with a running whip stitch in natural cord, the way a hand-made parasol edge or a leather hat brim is finished, so the stitches stay visible against the light. The shade sits on a short cylinder of solid wood that stands out from a round brass backplate, like a peg set into a workshop wall. Lit from within, the fabric glows evenly and throws light both up and down the wall, which is why this fabric shade wall sconce with wood arm and brass backplate was designed for either side of a bed or a mirror in mid-century and Japandi rooms.

Key Features

Whip-Stitched Top and Bottom

Both rims of the 23cm/9.1″ fabric shade are bound with a visible running cord stitch.

Wood Arm, Brass Backplate

A solid wood cylinder carries the shade off a 10cm/3.9″ round brass plate with brass fittings.

Light Up and Down

The shade is open at both ends, so one bulb lights the wall above and the surface below.

Size & Fit

Part	Measurement
Fixture Body	Dia 23cm/9.1″ × H 28cm/11″
Backplate	Dia 10cm/3.9″

Specifications

Fixture Type

Wall sconce, empire fabric shade on wood arm

Materials & Finish

Fabric shade with stitched rims; solid wood arm; brass backplate and fittings

Light Source

1 × E26 or E27, bulb included, warm light 3000K

Power

Hardwired, round backplate mounts to a standard wall junction box

Care

Dust the shade with a soft dry cloth, no water or cleaners · wipe wood and brass with a dry microfiber cloth

Certification

Certified: North America · Australia · Europe · Middle East

Design Style

Mid-CenturyJapandiScandinavian

Best For

Bedside wall, hallway, or beside a bathroom mirror

Downloads

Technical reference and setup files for the Avyra Wall Sconce. Need a doc that's not listed? Email info@docos.us.

Spec Sheet

Dimensions & details · PDF

Pending

Install Guide

Setup instructions · PDF

FAQ

How high should I mount it beside a bed?

Set the backplate so the bottom of the shade sits at about shoulder height when seated — roughly 120–140cm/47–55″ from the floor — so the bulb stays hidden and the light lands on a book.

Where does the light go?

The shade is open at both ends, so the 3000K bulb washes the wall above and lights the nightstand or counter below, with a soft glow through the fabric itself.

Is it hardwired or plug-in?

Hardwired. The 10cm/3.9″ round brass backplate covers a standard wall box; there is no cord or switch on the fixture, so it's controlled from the wall switch.

Does it match the Avyra table and floor lamps?

Yes. It uses the same stitched fabric shade, solid wood, and brass details as the rest of the Avyra family, so one room can carry all three.

Sprache

Land

Sprache

Land

Sprache

Land

Avyra Wall Sconce

Das macht es besonders

Premium-LED-Technologie

Kostenlos & schneller Versand

30-Tage Rückgaberecht ohne Fragen

Customer Reviews

Das könnte Ihnen auch gefallen